Fast Portable Tire Inflator | 12V DC | 150 PSI
FAST AND EFFICIENT INFLATION
The tire inflator is built with a premium brass movement and wires and has a maximum pressure of 150PSI. It can accurately measure and inflate from 0-150 PSI and the airflow rate is 25L/min to fully inflate the wheel in 3 to 5 minutes.
AUTOMATIC SHUT OFF FOR SECURE INFLATION
The new tire inflator can turn off automatically when the inflation pressure reaches the preset pressure, which ensures the safety of your tires during inflation.
LED LIGHT AND LCD DISPLAY FOR CONVENIENCE
Designing a backlit LCD digital display to show the pressure in 4 units (PSI, BAR, KPA, and KG/CM2) with 3 buttons for switching between units ("R" button), increasing pressure ("+" button), and decreasing pressure ("-" button). In addition, it is equipped with a bright LED light that provides a clear vision, even in the dark.
EASY TO USE
The 12V DC power connector must be plugged into a 12V cigarette lighter socket or other 12V outlets, the air hose must be connected tightly to the tire valve, and the inflator must be set to the preferred pressure. Finally, the power button must be pressed to turn on the inflator. to inflate the tire. After use, you can easily organize the hose and power cord to the back of our inflator.
Featuring 3 additional replaceable air nozzles and a 10ft cord, our air inflator not only can inflate DC 12V 10A cars and SUVs but also can fit bikes, motorcycles, kayaks, and all kinds of balls.
- Product Type: Electric Tire Inflator
- Material: ABS
- Working Voltage: DC 12V
- Maximum Current: 10A
- Power: 120W
- Maximum Pressure: 150PSI
- Air Flow Rate: 35L/min
- Inflation Time: 3-5mins
- Continuous Working Time: 8mins
- Item Size:
- Host: 15cm x 7cm x 19.5cm/5.9in x 2.76in x 7.68in (L x W x H)
- Hose Length: Approx. 50cm/19.7in
- Power Cord Length: 3m/9.84ft
- Item Weight: 876g/1.93lbs
- Packaging Size: 16cm x 7.5cm x 20cm/6.3in x 2.95in x 7.87in (L x W x H)
- Packaging Weight: 953g/2.1lbs
- 1 x Electric Tire Inflator
- 3 x Air Nozzles
- 1 x Spare Fuse
- 1 x User Manual
A DC 12V power source is required for the car air pump.
You need to start the engine before plugging in the air pump.
Truck tires cannot be inflated with the car air pump.
It has a three-meter power cord that can easily be connected to both the front and rear tires.
If you would like to set the default value of this air pump inflation, the (+ The key is up, the -key is down.)
Observe the current air pressure in real time after setting the default value for 3 seconds, exiting the preset mode.
Inflating the second tire requires pulling out the power cord, plugging in the 12V power supply, and turning on the inflation pump after the air charging pump stops working (the air pump is designed to reduce overuse).